VALKYRIE-CSB-RED
Conventional Wall Mount – Sounder/ Beacon
- Supply Voltage: 20Vto30VDC
- Loop Current-Quiescent: 0.5mA • Loop Current – Alarm Beacon : 3 mA Max.
- Max. Cable Size : 2.5 mm²
- Operating Temperature : -10ºC to 55ºC
- Max. Humidity : 95% RH Non-Condensing
- Case Material : ABS • Colour : Red or White
- Protection Category : IP44 – Type A – Indoor use
- Conventional Wall Mount – Sounder/ Beacon
- Supply Voltage: 20Vto30VDC
- Loop Current-Quiescent: 0.5mA • Loop Current – Alarm Beacon : 3 mA Max.
- Max. Cable Size : 2.5 mm²
- Operating Temperature : -10ºC to 55ºC
- Max. Humidity : 95% RH Non-Condensing
- Case Material : ABS • Colour : Red or White
- Protection Category : IP44 – Type A – Indoor use
Related products
-
-
-
Incendie
VALKYRIE-CS-RED
Conventional Sounder
• Supply Voltage : 20Vto30VDC
• Current – Sounder/ Beacon Active:10 mA-280 mW@ 28VDC
• Maximum Sounder Output : 97 dB (@ 1 meter – 30 V DC)
• Max. Cable Size: 2.5 mm²
• Operating Temperature : -10ºC to 55ºC
• Max. Humidity : 95% RH Non-Condensing
• Case Material : ABS and PC – Colour : Red or White
• Protection Category: IP21C – Type A – Indoor use
• Dim :110(D)x85(H)mm • Weight: 254 g -
-
-
Incendie
GEKKO 2L
- 2 loops panel
- Supports connection to Repeaters via RS422, Fibre-Optic or TCP/IP
- Networkable panel, compatible with OCTO+ and NODE+ range of panels
- Up to 250 devices per loop (only 125 addresses available)
- Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit)
- 32 individually programmable sounder addresses
- Full Self-Addressable Devices support
- 2 Fire output relays (change-over) and 1 Fault relay (NC – opens on fault)
- 2 conventional alarm outputs (Individually programmable)
- Both detection loops monitored for integrity
- 512 fully programmable sounder and I/O groups
- 384 fully programmable zones
- Event log (rolling, 10000 entries)
- Available only with ZEOS protocol
- Compatible with all our own low cost ancillary modules
