ZEOS-C-H
Rate of Rise/Fixed Temp Heat Detector
Rate of Rise/Fixed Temp Heat Detector
Supply Voltage : 10-30 V DC
Current – Quiescent :Heat: 7 uA / Smoke: 33 uA / Smoke &Heat: 35 uA
Current – Device In Alarm : 24 mA – Alarm LEDs
Sensitivity: According to N54-5 or/and EN54-7
Cable Size : 0.5-2.5 mm²
Reset/Start-Up Times : 20s max
Colour / Case Material : White / ABS
Max. Humidity : 95% RH Non-Condensing Normal / Transient Oper.
Temperature : 0ºC to 50ºC / -10ºC to 85ºC
Dim : 100 mm(D)x50 mm(H)
Weight : 92 g & 144 g inc. base
Compatibility : ORION, ORION MINI, ORION EX, ORION-PLUS, QUAD ZMU and ZMU
Related products
-
-
Incendie
VALKYRIE-CS-RED
Conventional Sounder
• Supply Voltage : 20Vto30VDC
• Current – Sounder/ Beacon Active:10 mA-280 mW@ 28VDC
• Maximum Sounder Output : 97 dB (@ 1 meter – 30 V DC)
• Max. Cable Size: 2.5 mm²
• Operating Temperature : -10ºC to 55ºC
• Max. Humidity : 95% RH Non-Condensing
• Case Material : ABS and PC – Colour : Red or White
• Protection Category: IP21C – Type A – Indoor use
• Dim :110(D)x85(H)mm • Weight: 254 g -
-
Incendie
ZEOS-C-S
Rate of Rise/Fixed Temp Heat Detector
Supply Voltage : 10-30 V DC
Current – Quiescent :
Heat: 7 uA / Smoke: 33 uA / Smoke & Heat: 35 uA
Current – Device In Alarm : 24 mA – Alarm LEDs
Sensitivity: According to N54-5 or/and EN54-7
Cable Size : 0.5-2.5 mm²
Reset/Start-Up Times : 20s max
Colour / Case Material : White / ABS
Max. Humidity : 95% RH Non-Condensing
Normal / Transient Oper. Temperature :0ºC to 50ºC / -10ºC to 85ºC
Dim : 100 mm(D)x50 mm(H)
Weight : 92 g & 144 g inc. base
Compatibility : ORION, ORION MINI, ORION EX, ORION-PLUS, QUAD ZMU and ZMU -
Incendie
GEKKO 2L
- 2 loops panel
- Supports connection to Repeaters via RS422, Fibre-Optic or TCP/IP
- Networkable panel, compatible with OCTO+ and NODE+ range of panels
- Up to 250 devices per loop (only 125 addresses available)
- Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit)
- 32 individually programmable sounder addresses
- Full Self-Addressable Devices support
- 2 Fire output relays (change-over) and 1 Fault relay (NC – opens on fault)
- 2 conventional alarm outputs (Individually programmable)
- Both detection loops monitored for integrity
- 512 fully programmable sounder and I/O groups
- 384 fully programmable zones
- Event log (rolling, 10000 entries)
- Available only with ZEOS protocol
- Compatible with all our own low cost ancillary modules
