GEKKO 2L
- 2 loops panel
- Supports connection to Repeaters via RS422, Fibre-Optic or TCP/IP
- Networkable panel, compatible with OCTO+ and NODE+ range of panels
- Up to 250 devices per loop (only 125 addresses available)
- Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit)
- 32 individually programmable sounder addresses
- Full Self-Addressable Devices support
- 2 Fire output relays (change-over) and 1 Fault relay (NC – opens on fault)
- 2 conventional alarm outputs (Individually programmable)
- Both detection loops monitored for integrity
- 512 fully programmable sounder and I/O groups
- 384 fully programmable zones
- Event log (rolling, 10000 entries)
- Available only with ZEOS protocol
- Compatible with all our own low cost ancillary modules
| Mains Power Supply Rating | 90V AC to 230V AC |
|---|---|
| Primary Dc Supply | 28.5V DC @ 2.4 A (Max) |
| Secondary Supply | 21.6 Min. – 27.2V DC (Max) – Battery charger: 27.5V DC |
| Battery Capacity (Internal) | Standard box: 2x 12V 7AH; Deep Box: for larger volume batteries |
| Aux Power Outpu | 2 x 24V DC 300mA / 1 x 24V switched out |
Related products
-
-
-
Incendie
VALKYRIE-CS-RED
Conventional Sounder
• Supply Voltage : 20Vto30VDC
• Current – Sounder/ Beacon Active:10 mA-280 mW@ 28VDC
• Maximum Sounder Output : 97 dB (@ 1 meter – 30 V DC)
• Max. Cable Size: 2.5 mm²
• Operating Temperature : -10ºC to 55ºC
• Max. Humidity : 95% RH Non-Condensing
• Case Material : ABS and PC – Colour : Red or White
• Protection Category: IP21C – Type A – Indoor use
• Dim :110(D)x85(H)mm • Weight: 254 g -
Incendie
CHAMELEON MINI REP/E
- Network Compatibility with the CHAMELEON range of control panels: G-One, GEKKO, OCTO+ and NODE+.
- Connection to the control panels via RS422, Fibre-Optic or TCP/IP
- Event log (10000 events)
- Backlit graphical LCD display of 240 x 64 pixels
- Programming by integrated keypad or Loader PC software
- Multiple language support (menu selectable
-
Incendie
ZEOS-AD-SHI
Addressable combined smoke & heat detector w/ isolator
- Supply Voltage : 17-30 V DC
- Current – Quiescent : 450 uA max
- Current – Device In Alarm : 4 mA – Alarm LED
- Sensitivity: According to N54-5 or/and EN54-7
